FlexDevice-L²

FlexDevice-L²

The multifunctional bus control unit FlexDevice-L² supports the current and upcoming bus systems and has numerous variable interfaces, thus covering most of the application fields where bus interfaces are required.
FlexDevice-L

FlexDevice-L

The multifunctional bus control unit FlexDevice-L supports the current and upcoming bus systems and has numerous variable interfaces, thus covering most of the application fields where bus interfaces are required.
FlexDevice-S

FlexDevice-S

The multifunctional bus control unit FlexDevice-S supports the current and upcoming bus systems and has one variable interface, so it covers most of the application fields where bus interfaces are required.
FlexCard PCIe3

FlexCard PCIe3

The FlexCard PCIe3 combines a high-performance platform for real-time capable remaining bus simulations or gateways and a 7-30 channel* measuring interface for automotive bus systems in one device.
FlexCard PXIe3

FlexCard PXIe3

The FlexCard PXIe3 combines a high-performance platform for real-time capable remaining bus simulations or gateways and a 7-30 channel* measuring interface for automotive bus systems in one device.
FlexConfig RBS

FlexConfig RBS

FlexConfig RBS is a software to generate a hardware assisted RBS and Gateways. Several network description formats are supported. The generated RBS runs independently on a separate hardware.
FlexCard PMC-II

FlexCard PMC-II

The FlexCard PMC-II is a bus interface device for automotive bus systems in PMC design. The card's 8 bus interfaces can be configured for different bus systems via Physical Layer (FlexTiny II) slots.
FlexCard Air-S

FlexCard Air-S

FlexCard Air-S is an affordable bus interface for wireless transport of CAN-HS and LIN messages via Bluetooth.
FlexCard USB-M

FlexCard USB-M

The FlexCard USB-M, robust and powerful, is a multifunctional USB interface device for analyzing and monitoring of CAN and FlexRay bus systems. One FlexRay Communication Controller is available in the FlexCard USB-M, including channel A and B.
FlexConfig Analyzer

FlexConfig Analyzer

The FlexConfig Analyzer is an application for Android based devices for monitoring CAN, LIN and FlexRay buses. FlexConfig Analyzer is therefore the perfect complement to the WLAN and Bluetooth-enabled bus interface cards such as the FlexDevice-S / L / L² or the FlexCard Air-S.
FlexConfig Developer

FlexConfig Developer

FlexConfig Developer is a cost-effective, powerful and user-friendly design and configuration software for automotive networks.
FlexMedia 1000BASE-T1

FlexMedia 1000BASE-T1

The FlexMedia 100BASE-T1 is a converter for 100BASE-T1 to 100BASE-TX and vice versa. With the FlexMedia 100BASE-T1, it is possible to connect an automotive Ethernet network to a standard PC for testing or diagnostic purposes.
FlexMedia 100BASE-T1

FlexMedia 100BASE-T1

The FlexMedia 100BASE-T1 is a converter for 100BASE-T1 to 100BASE-TX and vice versa. With the FlexMedia 100BASE-T1, it is possible to connect an automotive Ethernet network to a standard PC for testing or diagnostic purposes.
FlexSwitch 1000BASE-T1

FlexSwitch 1000BASE-T1

FlexSwitch1000BASE-T1 is one of the first 1000BAE-T1 switches on the market and can also score with special filter mechanisms. For each port of the switch, criteria can be defined that allow blocking of certain traffic on that port.
FlexOpto

FlexOpto

FlexOpto is a bidirectional media converter which transmits electrical FlexRay, CAN or LIN signals via optical fibre.
FlexGen-M SENT

FlexGen-M SENT

This is a versatile, mobile, autonomous platform with which sensor data can be recorded, processed and generated. The FlexGen-M Sent reads out connected SENT sensors and simulates virtual sensors. The unit also provides various signal manipulation functions, such as to test the limit value behavior of specific connected control units
FlexGen-M PWM

FlexGen-M PWM

The FlexGen-M PWM is a powerful PWM generator by which a variable PWM signal can be generated. All adjustable parameters can be read from the integrated display. Thanks to the robust aluminum housing and the high-grade controls, it is outstandingly well suited to tough mobile applications on test benches and in test vehicles, as well as for the PWM actuation of control valves and actuators
FlexMeasure-L

FlexMeasure-L

The inline measuring adapter was developed as an alternative to the FlexMeasure-S (E812). The measuring value output is digital via a CAN bus. The included DBC file allows for quick and simple integration into new and existing measuring systems. To ensure HV safety, the HV and LV circuits are galvanically isolated.
Development Board FlexDevel

Development Board FlexDevel

The FlexDevel is a low cost solution for beginners in automotive bus systems. It consists of a universal micro controller development platform with FlexRay, CAN, LIN and Ethernet interfaces.
FlexGen-M PWM Remote

FlexGen-M PWM Remote

The FlexGen-M PWM remote can be used to generate variable PWM signals with output currents of up to 10 A. The frequency, the pulse duty factor as well as the setting and control parameters can be determined via a CAN interface through an automation system. The current values can be read back through a sensor input and the integrated current measurement.
FlexGen-S PWM

FlexGen-S PWM

The FlexGen-S PWM is a PWM generator in which the PWM signal is generated by an open-collector output stage. This unit thus generates PWM signals for test benches and test vehicles, or speed presets on control inputs of automotive fans and pumps. The frequency and signal ratio can be individually adjusted by a rotary encoder.
FlexGen-S Sensor

FlexGen-S Sensor

The FlexGen-S SENSOR is constructed flexibly in order to solve varying sensor/actuator technology tasks. Usually, sensors need a control unit for visualizing, processing and supplying.
FlexInterlock-M

FlexInterlock-M

FlexInterlock-M Is a module for the use in test benches which emulates an HV interlock‘s functionality according to an HV battery by generating and evaluating an HV interlock signal. Several redundant switch contacts and LEDs are provided to signalize whether the HV interlock was or was not detected.
FlexIO-M Thermo

FlexIO-M Thermo

The FlexIO-M Thermo is likewise a thermocouple measuring module for electrically isolated temperature measurement. This variant offers eight type K thermocouple connections.
FlexIO-S Analog

FlexIO-S Analog

The FlexIO-S Analog measures voltages up to ±60 V and transmits the values on a CAN bus. Voltages of up to ±10 V can also be simulated to power sensors.
FlexIO-S Digital

FlexIO-S Digital

With FlexIO-S Digital , data on a CAN bus can be converted into digital signals for status display or to switch external peripherals. Additionally, digital inputs can be read-in and their signals mapped and transmitted on the CAN bus. For the purpose, the hardware features a CAN interface as well as eight high-side and eight low-side channels which can be individually configured optionally as inputs or outputs.
FlexMeasure-S

FlexMeasure-S

The robust FlexMeasure-S was developed especially for measuring currents in high-voltage line in passenger vehicles. Due to the flexible connecting options, the ISI current inline can be integrated in existing circuits of up to 60A without problems.
FlexSupply-M

FlexSupply-M

FlexSupply-M was designed for supporting on-board networks during repair and service work on vehicles. It contains a charger, a car battery and various electronics components.
FlexSupply-S

FlexSupply-S

The FlexSupply-S was designed especially for supplying measurement technology in test vehicles. Supply voltages drops caused by e.g. overlong lines to measurement technology components or the start-up process are effectively compensated.
  • BDU - Bundesverband Deutscher Unternehmensberater e.V.
  • Top Empleyer - Automotive Deutschland 2016
  • kununu - Top Company
  • EY Entrepreneur des Jahres 2013
  • Fair Company 2015
  • TÜV Süd - ISO 9001
  • Beste Berater 2015
  • Deutschlands kundenorientierte Dienstleister 2011
  • Top 100 - 2011
  • TOP Consultant