The FlexISO-S CAN isolating adapter is used for galvanic decoupling of CAN or CAN FD bus systems with a very low signal delay. As a result, the achievable line lengths are only slightly reduced. The adapter is suitable for 12V vehicles and 24V test bench applications.

The multifunctional bus control unit FlexDevice-S supports the current and upcoming bus systems and has one variable interface, so it covers most of the application fields where bus interfaces are required.

The multifunctional bus control unit FlexDevice-L² supports the current and upcoming bus systems and has numerous variable interfaces, thus covering most of the application fields where bus interfaces are required.

The multifunctional bus control unit FlexDevice-L supports the current and upcoming bus systems and has numerous variable interfaces, thus covering most of the application fields where bus interfaces are required.

The FlexCard PXIe3 combines a high-performance platform for real-time capable remaining bus simulations or gateways and up to 30 channel* measuring interface for automotive bus systems in one device.

The FlexCard PCIe3 combines a high-performance platform for real-time capable remaining bus simulations or gateways and up to 30 channel* measuring interface for automotive bus systems in one device.

FlexConfig RBS is a software to generate a hardware assisted RBS and Gateways. Several network description formats are supported. The generated RBS runs independently on a separate hardware.

The FlexCard PMC-II is a bus interface device for automotive bus systems in PMC design. The card's 8 bus interfaces can be configured for different bus systems via Physical Layer (FlexTiny II) slots.

FlexConfig SDK is a .NET lib for the easy access of automotive bus systems in your own windows applications. The Library supports a wide range of automotive network description formats like AUTOSAR (.arxml) or CANdb. and together with the STAR ELECTRONICS FlexDevices or FlexCards we provide a simple and very powerful solution for this challenge.

FlexCard Air-S is an affordable bus interface for wireless transport of CAN-HS and LIN messages via Bluetooth.

The FlexCard USB-M, robust and powerful, is a multifunctional USB interface device for analyzing and monitoring of CAN and FlexRay bus systems. One FlexRay Communication Controller is available in the FlexCard USB-M, including channel A and B.

The FlexConfig Analyzer software visualizes CAN, LIN or FlexRay data on a smartphone or tablet. For this, a wireless connection is established via Wi-Fi with a suitable bus interface.

FlexConfig Developer is a cost-effective, powerful and user-friendly design and configuration software for automotive networks.

The FlexMedia 1000BASE-T1 is a converter for 1000BASE-T1 to 1000BASE-TX and vice versa. With the FlexMedia 1000BASE-T1, it is possible to connect an automotive Ethernet network to a standard PC for testing or diagnostic purposes.

The FlexMedia 100BASE-T1 is a converter for 100BASE-T1 to 100BASE-TX and vice versa. With the FlexMedia 100BASE-T1, it is possible to connect an automotive Ethernet network to a standard PC for testing or diagnostic purposes.

FlexSwitch1000BASE-T1 is one of the first 1000BAE-T1 switches on the market and can also score with special filter mechanisms. For each port of the switch, criteria can be defined that allow blocking of certain traffic on that port.

FlexOpto is a bidirectional media converter which transmits electrical FlexRay, CAN or LIN signals via optical fibre.

The FlexDevel is a low cost solution for beginners in automotive bus systems. It consists of a universal micro controller development platform with FlexRay, CAN, LIN and Ethernet interfaces.