FL3X Config mobile

Bus Analyzer Software for CAN, LIN, FlexRay & Automotive Ethernet

Article number: 3-V1140B01-01

The FL3X Config mobile software visualizes CAN, LIN, FlexRay and Ethernet data on a smartphone or tablet. For this, a wireless connection is established via WiFi with a suitable bus interface.

Request product

Add to favorites Remove from favorites

AllDescriptionTechnical DetailsDownloadsTrainingsMatching Products

Product Information

Description

The FL3X Config mobile software visualizes CAN, LIN, FlexRay and Ethernet data on a smartphone or tablet. For this, a wireless connection is established via WiFi with a suitable bus interface.

The system is ready to operate quickly and can be used without extensive expert knowledge. New display sets can be generated and saved in no time at all. The high-resolution touch screens of current tablets facilitates a clear depiction of the required signals.

Advantages

Wireless visualization of CAN, LIN, FlexRay and Ethernet data
Support of Android devices version 4.4 to 12
Display of signal values in different diagrams (speedometer, graph, signal set, label)
Short-term logging with labelling via language recording
Supports different database formats, e.g. AUTOSAR (*.arxml), FIBEX (*.xml), CANdb (*.dbc) and LDF (*.ldf)
FL3X Config projects can be loaded
Bus tracing possible

Technical Details

Data communications via WiFi
One WiFi bus interface parallel usable
Supports the following formats: > FIBEX (.xml): 2.0.0d, 2.01, 3.0.0, 3.1.0, 4.0, 4.1.1 > FIBEX+ 1.4 > AUTOSAR (.arxml): 3.02, 3.1.0, 3.1.4.DAI.2, 3.1.4.DAI.4, 3.2.2, 4.0.3, 4.1.1, 4.2.1, 4.2.2, 4.3.0, 4.3.1, 4.4.0, 4.6.0 > CANdb (.dbc) and LDF (.ldf)
Automatic interpretation of messages with loaded CANdb, FIBEX, AUTOSAR or LDF through the software
Creation of projects for all devices of the FlexDevice family that are fully compatible with FlexConfig RBS
Sending of CAN-FD/HS and LIN messages
Receiving of FlexRay, CAN-FD/HS, LIN and Ethernet messages
Partial support for SOME/IP
Three display modes are supported: chronologic, cyclic and graphic
Graphic display of bus/network communications as gauge, linechart, barchart, matrixchart, lamp, signal, text, button, timer
All displays can be zoomed or moved stage-free
Change between frame and PDU mode
Flexible generation of display sets depending on use case
Share projects between FlexConfig RBS and FlexConfig Analyzer
Create, start and save manipulations and sequences
Swiping between several graphic displays
Improved usability through automatic filter function
Simple logging on tablet/Android device in asc and mdf files
Logging with parallel voice recording possible
Support pre- and post-logging over 120 seconds before and after activation
Alarm function for data monitoring
Projects can be moved to other devices within the FL3X Device family in just a few steps
Listen-only mode

Downloads

Specsheet specsheet_fl3x-config-mobile.pdf 1.32 MB Download

User manual fl3x_config_mobile_user_manual.pdf 7.70 MB Download

FL3X Config mobile App fl3x_config_mobile-v1.3.1.0.apk 103.72 MB Download

Trainings

FL3X Training SOME/IP & Ethernet

Make your communications future-proof! In our new training course SOME/IP & Ethernet we will provide you with all the technical knowledge you need. Whether in German or English, you can choose in which language the training takes place. You will receive the documents in English. You can also decide where your individual training takes place: at the STAR® site in Göppingen, at your premises, or online.

View training content Request FL3X Training

FL3X Training FL3X Config

The FL3X Config software provides solutions for even the most complex of technical networking challenges. No matter what task you’re dealing with – whether it’s to do with restbus simulation, rapid prototyping, gateway nodes or signal manipulation – FL3X Config has the right solution. FL3X Config is intuitive and can be adapted to your own use case..

View training content Request FL3X Training

Matching Products

FL3X Device-L

The multifunctional bus control unit FlexDevice-L supports the current and upcoming bus systems and has numerous variable interfaces, thus covering most of the application fields where bus interfaces are required.

Details